24 Hour Emergency Service 0402 290 290

When Should your Sewer Pipes Need to be Replaced?


Sewer pipes won’t last for centuries and will eventually crumble and be destroyed. If ever such events happen in your household, then you will be facing one of the most disastrous plumbing emergencies a homeowner can experience. It’s not the end of your plumbing system if a sewer pipes becomes totally damaged and unable to get rid of waste from your household, since there are plumbing contractors that can immediately go to your home and fix the problem.
The thing is that a damaged sewer pipeline can cause a lot of disruption in your house so it’s much beneficial on your part if you can avoid this from happening. Replacing the sewer pipes when needed can help prevent a lot of sewer line problems. The question that comes to mind is when should you replace your sewer pipes? You can check out the answers below!

The pipes in your house are galvanised
Most old houses use galvanised pipes for the plumbing system as well as the sewer line. This steel type might be durable in the past, but just like any other type of metal, it will corrode and disrupt the flow of the sewer line. If your house is very old, then you might want to get it checked if it still uses galvanised pipes. It’s most likely that the pipes are corroded by now.
Also, be sure not to replace the galvanised pipe lining with the same material composition since it will just extend the problem instead of actually solving it. Replacing the entire sewer pipes may be expensive but it can be advantageous for you in the long run. Inspecting the pipes on your own may prove futile since you can’t visually inspect it since it’s behind the wall or concrete. Instead, hire a licensed plumber to do the check-up for you.

The sewer lines are too old
You can actually rent a specialised sewer camera to inspect the sewer pipes in your proximity but it will be useless if you have no idea what you’re looking at or what you’re looking for. It’s much better to have a plumber’s trained eye see the examination of the pipe lining. Sewer pipes that are composed of iron and clay are vulnerable to a common sewer line problem which is a tree root intrusion. It’s much worse if the types of pipes mentioned are aged. Be careful when you’re trying to get rid of tree roots with the use of chemicals like copper sulphate since it may cause even more damage to the old pipelines that are already breaking up.
Cured-in-place pipe rehabilitation can actually solve this issue by integrating an epoxy liner into the current pipe system; improving the flow efficiency of the sewer while strengthening the pipeline. This is one of the few rehabilitation methods that seldom requires an excavation process in order to be implemented. But of course, you need to consult your local plumber for some advice on doing the best course of action in repairing or replacing your old sewer pipes.